Hey, what object should i put on the top of this yellow barrier. The object must be a guide for motorist/drivers.. thanks :D
(http://i.imgur.com/gPhWmnT.jpg)
you can change the object IDs of 3335, 3336, 9185 with text and it will show up if you use MTA, not sure about samp con.
instead of Object ID 3335 would be "text:[text here]"
Quote from: Ethan on December 28, 2016, 15:20
you can change the object IDs of 3335, 3336, 9185 with text and it will show up if you use MTA, not sure about samp con.
instead of Object ID 3335 would be "text:[text here]"
Thanks :like: :D :3 O:-)
how about a Pole?
Those barriers do not fit the environment, IMO.
leave it to me ;) ;) ;) :ccmas: O:-)
You could lower those barriers into the ground, conect them nicely and put some fences on top. :) just my suggestion.
what fence should i put? can u give me an ID object as a example? :) :))
Quote from: Pepe_The_Frog on December 28, 2016, 17:21
what fence should i put? can u give me an ID object as a example? :) :))
look it the "fences" files or search fence
http://dev.prineside.com/en/gtasa_samp_model_id/category/fences-walls-gates-and-barriers/
(http://i.imgur.com/39PIMN9.jpg)
ID 1653 Looks nice :D :o :ccmas: :like:
That looks much better ;)
Quote from: Benny on December 29, 2016, 06:48
That looks much better ;)
Yes :D thanks for the idea :3 :like: :ccmas:
Quote from: Martin on December 28, 2016, 15:50
Those barriers DO NOT fit the environment, IMO.
Quote from: Ethan on December 28, 2016, 15:20
you can change the object IDs of 3335, 3336, 9185 with text and it will show up if you use MTA, not sure about samp con.
instead of Object ID 3335 would be "text:[text here]"
That only works in CT iirc.
Quote from: CarlJohnson on December 29, 2016, 08:56
That only works in CT
no, it works in MTA too. I can do the message board, test in MTA and it shows up..
IMO= in my opinion AKA "
i dont think" that barrier fits the enviroment
Quote from: Ethan on December 28, 2016, 15:20
you can change the object IDs of 3335, 3336, 9185 with text and it will show up if you use MTA, not sure about samp con.
instead of Object ID 3335 would be "text:[text here]"
Quote from: Ethan on December 29, 2016, 12:59
Quote from: CarlJohnson on December 29, 2016, 08:56
That only works in CT
no, it works in MTA too. I can do the message board, test in MTA and it shows up..
IMO= in my opinion AKA "i dont think" that barrier fits the enviroment
If you are talking about those green signs, that only works on CT. It never worked in mta for me.
Quote from: Pepe_The_Frog on December 29, 2016, 05:40
(http://i.imgur.com/39PIMN9.jpg)
ID 1653 Looks nice :D :o :ccmas: :like:
Good
What do you guys think on the support? is it okay?
(http://i.imgur.com/BmioD5o.jpg)
I would say it's too big...
very big.
Quote from: Benny on January 02, 2017, 16:37
I would say it's too big...
that's pretty good support because it makes the down highway functional
Quote from: DOC on January 02, 2017, 17:31
Quote from: Benny on January 02, 2017, 16:37
I would say it's too big...
that's pretty good support because it makes the down highway functional
I'm planning to make it two highway in that part (one road for left side and one road for right side, like you suggested before) so it will consume space above and the big support will fit perfectly...
Quote from: Pepe_The_Frog on January 02, 2017, 18:16
Quote from: DOC on January 02, 2017, 17:31
Quote from: Benny on January 02, 2017, 16:37
I would say it's too big...
that's pretty good support because it makes the down highway functional
I'm planning to make it two highway in that part (one road for left side and one road for right side, like you suggested before) so it will consume space above and the big support will fit perfectly...
Oh it's interesting the thing, I encourage and lucky with that great project :))
Quote from: Rory on January 02, 2017, 18:58
Oh it's interesting the thing, I encourage and lucky with that great project :))
Thanks Rory :D :3 :)) :ccmas:
Quote from: Pepe_The_Frog on January 02, 2017, 18:16
Quote from: DOC on January 02, 2017, 17:31
Quote from: Benny on January 02, 2017, 16:37
I would say it's too big...
that's pretty good support because it makes the down highway functional
I'm planning to make it two highway in that part (one road for left side and one road for right side, like you suggested before) so it will consume space above and the big support will fit perfectly...
(http://i.imgur.com/ijNIBei.jpg)
2 roads now, is it okay now? :)
Quote from: Pepe_The_Frog on January 02, 2017, 19:32
2 roads now, is it okay now? :)
so wait a sec.. why is there a skyway above the highway that already exists.. im lost on that part, and yes.. 2 separate roads for four lane traffic
Quote from: Pepe_The_Frog on January 02, 2017, 19:32
Quote from: Pepe_The_Frog on January 02, 2017, 18:16
Quote from: DOC on January 02, 2017, 17:31
Quote from: Benny on January 02, 2017, 16:37
I would say it's too big...
that's pretty good support because it makes the down highway functional
I'm planning to make it two highway in that part (one road for left side and one road for right side, like you suggested before) so it will consume space above and the big support will fit perfectly...
(http://i.imgur.com/ijNIBei.jpg)
2 roads now, is it okay now? :)
Much better.
Why a highway above a highway? What is the point of that? I know you are building a skyway but this makes no sense.
Quote from: TheGame on January 02, 2017, 20:44
Why a highway above a highway? What is the point of that? I know you are building a skyway but this makes no sense.
You'll see it when it's done :D .. a
part of a skyway which is on that freeway part to
cross inside LV. I placed them there because i don't see any wide and big spaces for skyway and it's supports except the three freeways of LV. There Edges part of LV (The north and east hilly border of san andreas) can be a space for skyway too but i don't want to rely the skyway on that Edge part so instead i make the skyway crossed through LV in the middle of LV :)
Here in my country there's an Expressway below and skyway directly above it , so it came from that idea :)
(http://arcasouth.ph/wp-content/uploads/2014/05/view-skyway.jpg)
red line is the skyway route
(http://i.imgur.com/0aleG7T.jpg)
And one more reason for that is the exit/entrance:
(http://i.imgur.com/LNU6vwJ.jpg)
Quote from: Pepe_The_Frog on January 02, 2017, 21:49
And one more reason for that is the exit/entrance:
(http://i.imgur.com/LNU6vwJ.jpg)
When it's ready make a video.
Quote from: DOC on January 03, 2017, 08:34
Quote from: Pepe_The_Frog on January 02, 2017, 21:49
And one more reason for that is the exit/entrance:
(http://i.imgur.com/LNU6vwJ.jpg)
When it's ready make a video.
Yes :D might take a while because i'm in college now :)